Back shopping

Registration

LAC F3D 200 for additive manufacturing

The LAC F3D 200 dryer is used for moist filaments which represent one of the greatest quality risks in additively manufactured parts (3D printing). This vacuum dryer ensures perfect moisture removal through lower air pressure and allows the fibre to be printed without moisture and damage!

Type of material: plastic
Size: suitable for one or two spools up to 20 cm in diameter

€2 475

LAC F3D 200 for additive manufacturing

The LAC F3D 200 dryer is used for moist filaments which represent one of the greatest quality risks in additively manufactured parts (3D printing). This vacuum dryer ensures perfect moisture removal through lower air pressure and allows the fibre to be printed without moisture and damage!

Type of material: plastic
Size: suitable for one or two spools up to 20 cm in diameter

 

Parameters

Width: 36 cm
Height: 43.5 cm
Depth: 54 cm
Volume: 10 l
Weight: 33,5 kg

 

Drying time

Materials Dryer Temperature Drying Time LAC F3D
PLA 50°C (122°F) > 3h 1,5h
ABS 65°C (149°F) > 3h 1,5h
PETG/CPE 65°C (149°F) > 3h 1,5h
Nylon 70°C (158°F) > 12h 7h
Desiccant 65°C (149°F) > 3h 1,5h
PVA 45°C (113°F) > 10h 6h
TPU/TPE 55°C (131°F) > 4h 2,5h
ASA 60°C (140°F) > 4h 2,5h
PP 55°C (131°F) > 6h 3,5h
HIPS 60°C (140°F) > 4h 2h
PC 70°C (158°F) > 6h 4h
PEEK 70°C (158°F) > 6h 4h

 

3D printing filaments absorb moisture from the air and deteriorate their quality. During printing with damp material you may hear a hissing or cracking sound accompanied by moisture vapor. The solution to this problem is to use a vacuum induction dryer. The dryer creates a vacuum by removing all air from the chamber and ensures evaporation of the water from the wet fibre. Low air pressure also improves drying and storage of the printing fibre.

Benefits

  • High-quality steel construction
  • Venting to prevent vapor condensation during firing (corrosion reduction)
  • Heating from all sides, including the bottom
  • Top insulating materials (low power consumption, possibility of rapid rise to the required temperature)
  • Warranty: 24 months

100% dry

The drying mode can be used to completely dry the damp fibre. Built-in regulator, vacuum pump, induction heating unit and valves ensure a well-defined drying cycle.

Low power consumption

The use of a vacuum dryer significantly reduces performance requirements. This is due to the reduction of the desired drying temperature and to the drying time.

This dryer has a capacity of 2 spools with a diameter of 200 mm. If you use only 300 mm diameter reels, check the LAC F3D 300.

 

 

Category: Vacuum induction filament dryer
Availability: Pre-order
Delivery to:
10.9.2020
€2 475
€2 045,45 excl. VAT
Back shopping